Isis Retransmit-Interval - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

isis retransmit-interval

isis retransmit-interval seconds
Syntax
no isis retransmit-interval
Command introduced before JUNOSe Release 7.1.0.
Release Information
Configures the number of seconds between retransmission of LSPs with the same
Description
lsp-id for point-to-point links. The no version restores the default value.
Options
Interface Configuration, Subinterface Configuration
Mode
1136
isis retransmit-interval
seconds Number of seconds in the range 1–65535; default value is 5. The
number should be greater than the expected round-trip delay between any two
routers on the attached network. The setting of this parameter should be
conservative, or needless retransmission will result. The value should be larger
for serial lines.