Delta-Sampling - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

delta-sampling

delta-sampling [ discontinuity-id mibId
Syntax
| discontinuity-id-type { timeStamp | timeTicks } ]
no delta-sampling [ discontinuity-id ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies delta sampling for the trigger you are configuring. The no version returns
Description
the trigger to the default sampling method absolute-value sampling.
Options
SNMP Trigger Configuration
Mode
discontinuity-id Specifies a discontinuity MIB ID for the sample. The
discontinuity MIB ID monitors the sample for any discontinuity errors during
the sample frequency. If a discontinuity error occurs, the router removes the
sampling for that interval.
mibId Object ID of the discontinuity MIB attribute that you want to use for this
trigger
discontinuity-id-type Specifies a discontinuity ID type (either timeStamp or
timeTicks). The discontinuity ID type indicates the time value that you expect
for a specific sample.
Chapter 5: D Commands
507
delta-sampling