Ip Vrrp Track - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

ip vrrp track

ip vrrp vrid track objectName [ decrement priorityValue ]
Syntax
no ip vrrp vrid track objectName
Command introduced in JUNOSe Release 7.2.0.
Release Information
Tracks a specified object and changes the priority of that object when the state of
Description
the object changes from an up state to a down state. The priority is decremented by
the specified value or by the default value (100; when no decrement value is specified).
The object priority is restored when the state of the object changes from a down
state to an up state. The no version disables any tracking for the object.
Options
Interface Configuration
Mode
vrid VRID identifier; a number in the range 1–255
objectName Name of the object to track
priorityValue Priority value of the VRRP router; a number in the range 1–255;
default value is 100
Chapter 10: I Commands
989
ip vrrp track