Mpls Ldp Egress-Label - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

mpls ldp egress-label

mpls ldp egress-label { explicit-null | non-null }
Syntax
no mpls ldp egress-label
Command introduced in JUNOSe Release 8.1.0.
Release Information
Configures LDP to advertise the explicit null label (label 0) or a non-null label for the
Description
LSR that is the egress router for the prefix. This command takes effect immediately.
The no version restores the default, where the egress router advertises the implicit
null label (label 3), which causes the router's upstream neighbor to perform a
penultimate hop pop.
Global Configuration
Mode
1358
mpls ldp egress-label