Lsp-Refresh-Interval - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

lsp-refresh-interval

lsp-refresh-interval seconds
Syntax
no lsp-refresh-interval
Command introduced before JUNOSe Release 7.1.0.
Release Information
Sets the link-state packet rate at which locally generated IS-IS link-state packets are
Description
periodically transmitted. The no version restores the default value, 900.
Options
Router Configuration
Mode
seconds Number in the range 1–65535; the refresh interval in seconds; default
value is 900
Chapter 12: L Commands
1259
lsp-refresh-interval