Ip Flow-Cache Timeout - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

ip flow-cache timeout

ip flow-cache timeout { active activeTimer | inactive inactiveTimer }
Syntax
no ip flow-cache timeout { active | inactive }
Command introduced before JUNOSe Release 7.1.0.
Release Information
Defines the J-Flow activity or inactivity timers. The no version restores the default
Description
value of each timer.
Options
Global Configuration
Mode
802
ip flow-cache timeout
activeTimer Value of activity timer in the range 0–60 minutes; default value is
30
inactiveTimer Value of inactivity timer in the range 10–600 seconds; default
value is 15