Ipv6 Local Pool - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

ipv6 local pool

ipv6 local pool poolName
Syntax
no ipv6 local pool poolName [ force ]
Command introduced in JUNOSe Release 10.1.0.
Release Information
Accesses IPv6 Local Pool Configuration mode. Specifies the IPv6 local address pool
Description
from which prefixes are allocated to the requesting router in networks that use
DHCPv6. The no version removes the IPv6 local pool.
Options
Global Configuration
Mode
poolName Name of the IPv6 local address pool to be used to delegate prefixes
to the requesting routers or DHCPv6 clients; string of up to 16 alphanumeric
characters
force Forcibly deletes an IPv6 local address pool from which prefixes have
been allocated. When a pool from which prefixes have been assigned to DHCPv6
clients is deleted, the corresponding DHCPv6 bindings are also deleted.
Chapter 10: I Commands
1035
ipv6 local pool