Mpls Statistics Next-Hop - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

mpls statistics next-hop

[ no ] mpls statistics next-hop nextHopIndex
Syntax
Command introduced in JUNOSe Release 7.1.0.
Release Information
Enables statistics collection for MPLS next hops. By default, statistics are enabled for
Description
next hops depending on the protocol that created the MPLS next hop. Statistics are
not stored in NVS. The no version disables statistics collection.
Options
Global Configuration
Mode
1420
mpls statistics next-hop
nextHopIndex Integer uniquely identifying a next hop; in the range 1–1048575