Ip Access-Routes - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

ip access-routes

[ no ] ip access-routes
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Enables the ability to create host access routes on a PPP interface, which is useful
Description
for the B-RAS application. It also enables an access route in a profile. The no version
disables the feature.
Interface Configuration, Profile Configuration, Subinterface Configuration
Mode
736
ip access-routes