Ip Ssh Timeout - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

ip ssh timeout

ip ssh timeout timeout
Syntax
no ip ssh timeout
Command introduced before JUNOSe Release 7.1.0.
Release Information
Sets a timeout period in seconds. The SSH server terminates the connection if protocol
Description
negotiation including user authentication is not complete within this timeout. The
no version restores the default value, 600 seconds.
Options
Global Configuration
Mode
958
ip ssh timeout
timeout Period in the range 10–600 seconds