L2Tp Tunnel Idle-Timeout - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

Chapter 12: L Commands

l2tp tunnel idle-timeout

l2tp tunnel idle-timeout [ timeOutValue ]
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Configures the tunnel idle-timeout value. Creates persistent tunnels by setting the
Description
value to 0. There is no no version.
timeOutValue Number in the range 0–86400 seconds
Options
Global Configuration
Mode
1193
l2tp tunnel idle-timeout