Ipv6 Pim Query-Interval - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

ipv6 pim query-interval

ipv6 pim query-interval queryTime
Syntax
no ipv6 pim query-interval
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies how often the router sends PIM router query messages from this interface.
Description
The no version specifies the default time interval, 30 seconds.
Options
Interface Configuration
Mode
queryTime Interval in the range 0–210 seconds at which the router sends PIM
router query messages from this interface
Chapter 10: I Commands
1095
ipv6 pim query-interval