Mdt-Data-Timeout - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

mdt-data-timeout

mdt-data-timeout timeout
Syntax
no mdt-data-timeout
Command introduced in JUNOSe Release 8.2.0.
Release Information
Configures the time in seconds before leaving the data MDT group. The no version
Description
returns to the default.
Options
IP PIM Data MDT Configuration
Mode
1308
mdt-data-timeout
timeout Time before leaving the data MDT group, in the range 1–1200 seconds;
the default is 180