Ip Tcp Ack-Rst-And-Syn - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

ip tcp ack-rst-and-syn

[ no ] [ ip ] tcp ack-rst-and-syn [ vrf vrfName ]
Syntax
The ip keyword for tcp commands is now optional (with the exception of the ip tcp
Description
adjust-mss command, which is IPv4 specific). For information about this command
and any other ip tcp command, see the tcp commands.
Global Configuration
Mode
962
ip tcp ack-rst-and-syn