Ip Ospf Dead-Interval - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

ip ospf dead-interval

ip ospf dead-interval deadInterval
Syntax
no ip ospf dead-interval
Command introduced before JUNOSe Release 7.1.0.
Release Information
Sets the time period during which the router's neighbors do not see hello packets
Description
before they declare the router to be down. The no version resets the dead interval
to its default.
Options
Interface Configuration, Subinterface Configuration
Mode
886
ip ospf dead-interval
deadInterval Number in the range 0–2147483647 seconds; default value is 40
seconds