Match Ipv6 Address - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

match ipv6 address

match ipv6 address
Syntax
{ accessListName [ accessListName ]* | prefix-list prefixListName
[ prefixListName ]* }
no match ipv6 address [ [ accessListName ]* | prefix-list [ prefixListName ]* ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
Matches any routes that have a destination network number address that is permitted
Description
by an access list or prefix list. The no version removes all address match clauses
from a route map unless you specify either an access list or a prefix list, in which
case only the list match is removed from the route map.
Options
Policy List Configuration, Route Map Configuration
Mode
1282
match ipv6 address
accessListName—String of up to 32 alphanumeric characters
prefixListName—Name of a single prefix list; string of up to 32 characters
* Indicates that one or more parameters can be repeated multiple times in a
list in the command line