Ip Igmp Explicit-Tracking - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

ip igmp explicit-tracking

[ no ] ip igmp explicit-tracking [ disable-if-igmp-v2-detected ]
Syntax
Command introduced in JUNOSe Release 8.2.0.
Release Information
Enables explicit host tracking for IGMP interfaces. The no version disables explicit
Description
host tracking on the interface or with the disable-if-igmp-v2-detected keyword
reverts to the default explicit host tracking.
Options
Interface Configuration, Profile Configuration
Mode
disable-if-igmp-v2-detected Disables explicit host tracking if IGMP V2 hosts
detected on IGMP V3 interfaces
Chapter 10: I Commands
ip igmp explicit-tracking
821