Default-Router - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

default-router

default-router ipAddressPrimary [ ipAddressSecondary ]
Syntax
no default-router
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies the IP address of the router that the subscriber's computer will use for traffic
Description
destined for locations beyond the local subnet. The default router must be on the
same subnet as the local server pool addresses configured with the network
command. The no version removes the association between the address pool and
the router.
Options
DHCP Local Pool Configuration
Mode
504
default-router
ipAddressPrimary IP address of preferred router
ipAddressSecondary IP address of secondary router