Ip Nat Outside Source Static - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

ip nat outside source static

[ no ] ip nat outside source static globalIpAddress localIpAddress
Syntax
[ no ] ip nat outside source static { tcp | udp } globalIpAddress globalPort localIpAddress
localPort
Command introduced before JUNOSe Release 7.1.0.
Release Information
Translates the source address when routing a packet from the outside network to
Description
the inside network, and " untranslates" the destination address when a packet travels
from the inside network to the outside network. The no version removes the static
translation and purges the associated translations from the translation table.
Options
Global Configuration
Mode
tcp Indicates a TCP port
udp Indicates a UDP port
globalIpAddress Inside global address
globalPort Inside global TCP or UDP port
localIpAddress Inside local address
localPort Inside local TCP or UDP port
Chapter 10: I Commands
ip nat outside source static
875