Ipv6 Mld Apply-Oif-Map - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

Chapter 10: I Commands

ipv6 mld apply-oif-map

ipv6 mld apply-oif-map mapName
Syntax
no ipv6 mld apply-oif-map
Command introduced before JUNOSe Release 7.1.0.
Release Information
Applies the specified outgoing interface (OIF) map to the current interface. The no
Description
version removes the outgoing interface map from the interface.
mapName Name of the OIF map
Options
Interface Configuration, Profile Configuration
Mode
1039
ipv6 mld apply-oif-map