Table of Contents
Advertisement
default-fields route
[ no ] default-fields route fieldOptions
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies the fields that will appear by default in the output of any subsequently
Description
issued show ip bgp or show bgp ipv6 command that displays routes (except for the
show ip bgp summary or show bgp ipv6 summary commands). The no version
removes the fields from the output.
Options
fieldOptions Field(s) to be displayed, in the format
all | [ afi | aggregator | as-path | atomic-aggregate | best | clusters | communities
| extended-communities | imported | intro | in-label | loc-pref | med | next-hop
| next-hop-cost | origin | originator-id | out-label | peer | peer-type | rd | safi |
stale | unknown-types | weight ]*
all—All available information; not recommended, because this information
for each network does not fit on a single line and is difficult to read
afi Address family identifier
aggregator—AS number and IP address of aggregator
as-path—AS path through which this route bas been advertised
atomic-aggregate—Whether the atomic aggregate attribute is present
best—Whether this is the best route for the prefix
clusters—List of cluster IDs through which the route has been advertised
communities—Community number associated with the route
extended-communities Extended community
imported—Whether the route was imported
intro Introductory information about the state of various BGP attributes;
this information is displayed only if you specify this keyword
in-label MPLS label for the route; the label received with incoming MPLS
frames
loc-pref Local preference for the route
med Multiexit discriminator for the route
next-hop IP address of the next router that is used when forwarding a
packet to the destination network
next-hop-cost Whether the indirect next hop of the route is unreachable,
if not, displays IGP cost to the indirect next hop
Chapter 5: D Commands
499
default-fields route
Advertisement
Table of Contents
