Ipv6 Initial-Sequence-Preference - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

ipv6 initial-sequence-preference

ipv6 initial-sequence-preference preference
Syntax
no ipv6 initial-sequence-preference
Command introduced in JUNOSe Release 9.3.0.
Release Information
Configures the warm restart replay preference for an IPv6 interface after a high
Description
availability switchover. The no version restores the default value.
Options
Subinterface Configuration
Mode
preference Preference value, 0 or 1; 1 indicates highest preference; default value
is 0
Chapter 10: I Commands
ipv6 initial-sequence-preference
1033