Mirror-Enable - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

Chapter 13: M Commands

mirror-enable

[ no ] mirror-enable
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Enables the use of the secure packet mirroring commands. The secure commands
Description
are then visible and can be used during the current CLI session. The no version
disables the use of packet mirroring commands; the commands no longer appear
in the CLI.
Privileged Exec
Mode
Configuring CLI-Based Mirroring
Related Topics
1327
mirror-enable