JUNOSe 11.1.x Command Reference Guide A to M
ipv6 mld-proxy unsolicited-report-interval
ipv6 mld-proxy unsolicited-report-interval tenths-of-a-second
Syntax
no ipv6 mld-proxy unsolicited-report-interval
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies how often the upstream interface should transmit unsolicited reports. This
Description
command has no effect on interfaces other than the upstream value. The no version
transmits unsolicited reports using the default value, 100-tenths of a second (10
seconds).
NOTE: Issue this command only on the upstream interface. Otherwise, this command
will have no effect.
Options
Interface Configuration
Mode
1046
ipv6 mld-proxy unsolicited-report-interval
tenths-of-a-seconds Time interval at which the interface transmits unsolicited
reports