Ipv6 Multicast-Routing Disable-Rpf-Check - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

Chapter 10: I Commands

ipv6 multicast-routing disable-rpf-check

ipv6 multicast-routing disable-rpf-check accessListName
Syntax
no ipv6 multicast-routing disable-rpf-check
Command introduced before JUNOSe Release 7.1.0.
Release Information
Disables RPF checks for the (S,G) pairs in the specified access list. The no version
Description
restores the default situation, in which the router performs RPF checks for all (S,G)
pairs.
accessListName Name of the IPv6 access list that specifies the (S,G) pairs
Options
Global Configuration
Mode
1063
ipv6 multicast-routing disable-rpf-check