Ip Pim Ssm - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

ip pim ssm

ip pim ssm [ default | range ipAccessList ]
Syntax
no ip pim ssm
Command introduced before JUNOSe Release 7.1.0.
Release Information
Enables SSM and defines the SSM range of IP multicast addresses. The no version
Description
disables SSM on the router.
Options
Global Configuration
Mode
default Specifies that SSM use the IANA-specified range of 232/8
ipAccessList Name of the IP access list that specifies the range of multicast
addresses you want SSM to use
Chapter 10: I Commands
909
ip pim ssm