Domain-Id - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

domain-id

domain-id domainIdAddress | domainId
Syntax
no domain-id
Command introduced before JUNOSe Release 7.1.0.
Release Information
Sets the OSPF domain ID for an OSPF VRF on a PE. The no version restores the
Description
default value.
Options
Router Configuration
Mode
540
domain-id
domainIdAddress OSPF domain ID in IP address format; default value is the IP
address of the OSPF router configured in the VRF
domainId OSPF domain ID as an integer value in the range 0–4294967295;
default value is 0