Ipv6 Mld Access-Source-Group - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

ipv6 mld access-source-group

ipv6 mld access-source-group accessListName
Syntax
no ipv6 mld access-source-group
Command introduced before JUNOSe Release 7.1.0.
Release Information
Restricts hosts on this subnetwork to membership in those source groups (also known
Description
as " channels" ) permitted by the specified IPv6 access list. The no version removes
any access list restriction.
Options
Interface Configuration, Profile Configuration
Mode
1038
ipv6 mld access-source-group
accessListName Name of the access list; a string of up to 32 characters