Show Ip Rip - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

show ip rip

Syntax
Release Information
Description
Options
Mode
858
show ip rip [ vrf vrfName ] [ brief ] [ ifconfig ] [ ipAddress ] [ filter ]
Command introduced before JunosE Release 7.1.0.
Displays limited RIP general status information.
vrfName—Name of the VRF
brief—Displays limited information
ifconfig—Displays address and interface configuration information instead of the
default operational data
ipAddress—Displays information only for specific RIP network
filter—See Filtering show Commands on page 4
Privileged Exec, User Exec
Copyright © 2010, Juniper Networks, Inc.