Match Mpls-Label - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

match mpls-label

[ no ] match mpls-label
Syntax
Command introduced in JUNOSe Release 7.1.0.
Release Information
Matches on MPLS-labeled routes. By including this command in the appropriate route
Description
map (export, global export, global import route map), you can restrict importing or
exporting to only labeled or only unlabeled routes. The no version removes the
configuration.
Route Map Configuration
Mode
1288
match mpls-label