Log Destination Syslog Source - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

log destination syslog source

log destination syslog ipAddress source interfaceType interfaceSpecifier
Syntax
no log destination syslog ipAddress source [ interfaceType interfaceSpecifier ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies a source interface type and location for events logged to a system log server.
Description
Overrides the type and location of the actual source to enable server access behind
firewalls. The no version restores the default state, which is to use the actual interface
type and location of the source.
Options
Global Configuration
Mode
ipAddress IP address of the system log application
interfaceType Interface type; see "Interface Types and Specifiers" on page 5
interfaceSpecifier—Particular interface; format varies according to interface type;
see Interface Types and Specifiers on page 5
Chapter 12: L Commands
log destination syslog source
1243