mark-user-priority
[ no ] [ suspend ] mark-user-priority userPriorityValue
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Defines a policy rule that specifies the value of the 802.1p VLAN user priority bits.
Description
The no version removes the rule from the policy list; the suspend version temporarily
suspends the policy rule; the no suspend version resumes application of a suspended
rule.
NOTE: This command replaces the Policy List Configuration version of the
mark-user-priority command, which may be removed completely in a future release.
Options
Classifier List Configuration
Mode
Related Topics
userPriorityValue EXP bit value assigned to packets; number in the range 0–7
Policy Rule Precedence
Chapter 13: M Commands
1271
mark-user-priority