Dsu Mode - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

dsu mode

dsu mode { 0 | 2 }
Syntax
no dsu mode
Command introduced before JUNOSe Release 7.1.0.
Release Information
Sets the DSU mode for the lines. The no version clears the dsu mode. If you issue
Description
this command, be sure to issue the dsu bandwidth and scramble commands. Similarly,
if you issue the no version, be sure to issue the no versions of thedsu bandwidth and
scramble commands; otherwise, the interface may drop packets unexpectedly.
Options
Controller Configuration
Mode
552
dsu mode
0 Sets digital Link mode
2 Sets Larscom mode