Ipsec Clear Sa - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

ipsec clear sa

ipsec clear sa { all [ state tunnelState ] | tunnel tunnelName } [ phase { 1 | 2 } ]
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Refreshes ISAKMP/IKE or IPSec SAs. There is no no version.
Description
Options
Global Configuration
Mode
996
ipsec clear sa
all Reinitializes all SAs
state Reinitializes SAs on tunnels that are in a specific state
tunnelState State of tunnel, up, down, not-present
tunnel Specifies that an SA on a specific tunnel is to be reinitialized
tunnelName Name of tunnel
phase Specifies one of the following types of tunnel to be reinitialized:
1 ISAKMP/IKE tunnels
2 IPSec tunnels