Default-Fields Peer - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

default-fields peer

[ no ] default-fields peer fieldOptions
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies the fields that will appear by default in the output of subsequently issued
Description
show ip bgp summary and show bgp ipv6 summary commands. The no version
removes the fields from the output.
Options
fieldOptions Field(s) to be displayed, in the format
all | [ dynamic | intro | last-reset-reason | messages-received | messages-sent |
more-in-queue | peer-type | prefixes-received | remote-as | rib-version |
send-queue-length| state | times-up | up-down-time | updates-received |
updates-sent ]*
all All available information; not recommended, because this information
for each network does not fit on a single line and is difficult to read
dynamic Nature of peer, dynamic or not
intro Introductory information about the state of various BGP attributes;
this information is displayed only if you specify this keyword
last-reset-reason Reason for most recent reset
messages-received Total number of messages received from the peer
messages-sent Total number of messages sent to the peer
more-in-queue Status indicating whether any messages are waiting to be
sent to this peer
peer-type Type of BGP peer: internal, external, or confederation
prefixes-received Number of unique prefixes received from the peer
remote-as Remote AS number of the peer
rib-version Last RIB version queued to be sent to this peer
send-queue-length Number of messages queued to be sent to this peer
state State of the BGP session
times-up Number of times the session has been established
up-down-time How long the session has been up or down
updates-received Number of update messages received from the peer
Chapter 5: D Commands
497
default-fields peer