Mpls Bandwidth - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

mpls bandwidth

{ ip rsvp | mpls } bandwidth bandwidth
Syntax
no { ip rsvp | mpls } bandwidth
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies the total bandwidth reservable for MPLS on the interface. The no version
Description
restores the default value, 0.
Options
Interface Configuration
Mode
1342
mpls bandwidth
ip rsvp Specifies keyword for compatibility with non–E Series implementations
of MPLS
mpls Specifies JUNOSe MPLS implementation
bandwidth—Reservable bandwidth in kilobits per second, a value in the range
1–10000000