Dsr-Detect - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

dsr-detect

[ no ] dsr-detect
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Requires that a DSR signal be detected on the line for a user to log into the console.
Description
DSR is carried on pin 6 of the SRP module's RS-232 (DB-9) connector. The DSR input
must be connected to the DSR output of a modem or the DTR output of another DTE
device, such as a terminal server, that supports this signal. If a session is in progress
and the DSR signal is lost, the user is logged out automatically. The no version restores
the default of no DSR required.
Privileged Exec
Mode
550
dsr-detect