L2Tp Dial-Out Session Reset - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

l2tp dial-out session reset

l2tp dial-out session reset triggerIpAddress
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Resets the state of a dial-out session by forcing it to the dormant state. There is no
Description
no version.
Options
Privileged Exec
Mode
1168
l2tp dial-out session reset
triggerIpAddress Trigger IP address of the session