Table of Contents
Advertisement
frame-relay lmi-n392dce
frame-relay lmi-n392dce threshold
Syntax
no frame-relay lmi-n392dce
Command introduced before JUNOSe Release 7.1.0.
Release Information
Sets the error threshold counter (N392) on a DCE interface. The no version removes
Description
current setting and sets the default.
Options
Interface Configuration
Mode
threshold—Positive number in the range 1– 10; number of errors that will place
the interface in an operationally down state; default value is 2 errors
Chapter 7: F Commands
frame-relay lmi-n392dce
649
Advertisement
Table of Contents
