Mpls Match Exp-Bits - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

mpls match exp-bits

mpls match exp-bits bitValue set traffic-class className color { green
Syntax
| yellow | red }
no mpls match exp-bits bitValue
Command introduced before JUNOSe Release 7.1.0.
Release Information
Sets the traffic class and color for incoming MPLS packets whose EXP bits in the
Description
MPLS shim header match the specified EXP bits value. The no version reverts to the
default behavior for traffic matching the specified EXP bits value, setting neither
traffic class nor color.
Options
Global Configuration
Mode
bitValue Value in the range 0–7 that matches the corresponding binary value
(000–111) for the three EXP bits
className Name of a traffic class; the router supports up to eight traffic classes
green Sets packet color to green, indicating a low drop preference
yellow Sets packet color to yellow, indicating a medium drop preference
red Sets packet color to red, indicating a high drop preference
Chapter 13: M Commands
1387
mpls match exp-bits