Lease - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

lease

lease { days [ hours [ minutes [ seconds ] ] ] | infinite }
Syntax
no lease
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies the time period for which the supplied IP address is valid. The no version
Description
restores the default lease time, 30 minutes.
NOTE: Ensure that DHCP clients have a minimum lease of 120 minutes before you
begin a unified in-service software upgrade to prevent unwanted lease expirations
due to the length of the unified ISSU process.
Options
DHCP Local Pool Configuration
Mode
days Number of days for which the IP address is valid; in the range 0–32768
hours—Number of hours for which the IP address is valid in the range 0–24
minutes—Number of minutes for which the IP address is valid; in the range 0–60
seconds—Number of seconds for which the IP address is valid; in the range 0–60
infinite Assigns a lease that does not expire
Chapter 12: L Commands
1211
lease