Ipsec Option Dpd - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

Chapter 10: I Commands

ipsec option dpd

[ no ] ipsec option dpd
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Enables IPSec dead peer detection (DPD) for the current virtual router. With DPD
Description
enabled, the router detects when connectivity between the router and an IPSec peer
has been terminated. The router then sets the status for the tunnel and the upper
layer interfaces to down, which enables routing protocols to take alternate routes.
Also, administrators can then take corrective action. The no version restores the
default DPD setting, disabled.
Global Configuration
Mode
1007
ipsec option dpd