Ip Ftp Source-Interface - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

ip ftp source-interface

ip ftp source-interface interfaceType interfaceSpecifier
Syntax
no ip ftp source-interface [ interfaceType interfaceSpecifier ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
Identifies an interface by type and location as the source interface in FTP packets
Description
sent via the router's FTP client. The no version restores the source address in the
FTP packets to that on which the FTP connection is made.
Options
Global Configuration
Mode
interfaceType Interface type; see Interface Types and Specifiers on page 5
interfaceSpecifier—Particular interface; format varies according to interface type;
see Interface Types and Specifiers on page 5
Chapter 10: I Commands
807
ip ftp source-interface