JUNOSe 11.1.x Command Reference Guide A to M
ipv6 http port
ipv6 http port portNumber
Syntax
no ipv6 http port
Command introduced in JUNOSe Release 10.1.0.
Release Information
Specifies the port on which the HTTP local server receives connection attempts for
Description
IPv6. The no version restores the default port number.
NOTE: Port numbers from 1 to 1024 are known as reserved ports. We recommend
that you specify a port number that does not belong to this range.
Options
Global Configuration
Mode
Related Topics
1030
ipv6 http port
portNumber—Number of the port, in the range 0–65535; the default is port 80
Configuring the HTTP Server to Support Guided Entrance in the JUNOSe Broadband
Access Configuration Guide