Ip Sa-Validate Trap-Enable - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

ip sa-validate trap-enable

[ no ] ip sa-validate [ vrf vrfName ] trap-enable
Syntax
Command introduced in JUNOSe Release 7.1.0.
Release Information
Enables the generation of source address validation failure traps. The no version
Description
disables the generation of source address validation failure traps.
Options
Global Configuration
Mode
944
ip sa-validate trap-enable
vrfName Name of the VRF; string of 1–32 alphanumeric characters