Max-Lsp-Lifetime - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

max-lsp-lifetime

max-lsp-lifetime seconds
Syntax
no max-lsp-lifetime
Command introduced before JUNOSe Release 7.1.0.
Release Information
Sets the maximum time that IS-IS link-state packets persist without being refreshed.
Description
The no version restores the default time.
Options
Router Configuration
Mode
seconds Number in the range 1–65535; the lifetime of LSP in seconds; default
value is 1200 seconds
Chapter 13: M Commands
1299
max-lsp-lifetime