Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual page 1365

agent-remote-id Agent Remote ID, RADIUS attribute [26–2], Vendor ID
3561
calling-station-id Calling-Station-Id, RADIUS attribute [31]
dhcp-option-82 DHCP Option 82, RADIUS attribute [26–159], Vendor ID
4874
ip-address Framed-IP-Address, RADIUS attribute [8]; associated with the
virtual router where the command is issued, RADIUS VSA [26-1]
nas-port-id NAS-Port-Id, RADIUS attribute [87]
username User-Name, RADIUS attribute [1]; associated with the virtual
router where the command is issued, RADIUS VSA [26-1]
triggerValue Value of the triggerType (the specified RADIUS attribute) that
identifies the subscriber
ip Configures mirroring for an IP subscriber
ipv6 Configures mirroring for an IPv6 subscriber
l2tp Configures mirroring for an L2TP subscriber
policyName—Secure policy to attach to the subscriber's interface
Global Configuration
Mode
Configuring CLI-Based Mirroring
Related Topics
Chapter 13: M Commands
1323
mirror