Mpls Ldp Targeted-Hello Interval - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

mpls ldp targeted-hello interval

mpls ldp targeted-hello interval seconds
Syntax
no mpls ldp targeted-hello interval
Command introduced in JUNOSe Release 8.1.0.
Release Information
Configures the the interval between targeted hello packets sent by LDP. This command
Description
takes effect immediately. The no version restores the default value, 15 seconds.
Options
Global Configuration
Mode
1378
mpls ldp targeted-hello interval
seconds Number of seconds, in the range 1–65535