Disable-Autosync - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

disable-autosync

[ no ] disable-autosync
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Halts automatic synchronization between the primary and standby SRP modules.
Description
When high availability is enabled (that is, the high availability state is initializing,
active, or pending) this command affects only changes to nonconfiguration files.
With high availability enabled, configuration changes are always mirrored to the
standby SRP module. The no version restores the default situation, in which automatic
synchronization runs as a background process every 5 minutes.
Global Configuration
Mode
520
disable-autosync