Member-Interface-Type - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

member-interface-type

member-interface-type {vlan | atm-vc | ip}
Syntax
no member-interface-type
Command introduced in JUNOSe Release 9.2.0.
Release Information
Configures the member-interface type for a QoS interface set. The no version removes
Description
the member-interface type from the parameter definition.
Options
QoS Interface Set Configuration
Mode
Related Topics
vlan Specifies the member-interface-type as VLAN
atm–vc Specifies the member-interface-type as VLAN
ip Specifies the member-interface-type as VLAN
Configuring Interface Sets for QoS
Chapter 13: M Commands
1313
member-interface-type